With Five Times the Torque, Hydro-Powered HydroCut Reinstates Laterals Three Times Faster
Randolph,
New Jersey—June
23, 2009—
Powered by water pressure, the HydroCut™ self-propelled cutter generates 5 hp at
30,000 rpm to mill quickly and cleanly through tough materials. Its unique
hydro-powered design solves the biggest shortcomings of pneumatic cutters:
stalls, sloppy cuts, poor visibility, and the need for post-cut brushing and
auxiliary CCTV/jetting.
Water
cooling keeps HydroCut’s™ motor from overheating and extends cutter bit life.
Designed with few wearing parts, the moisture-tolerant motor requires scant
maintenance, most of which can be performed in the field. Diamond-impregnated
hardened-steel Kardiam™ cutter bits last up to 100 hours, minimizing the
disruption and expense of frequent bit changes.
HydroCut’s™
onboard cameras view work as it is being performed. To ensure unobstructed
viewing, debris is washed from the lens by integral water nozzles. High-speed
cutting and a remotely activated stabilizer arm minimize camera
vibration.
Because
HydroCut™ is self propelled, an operator needn’t waste effort stringing winch
lines from secondary access points. The standalone HydroCut™ requires only a
single point of entry and no auxiliary CCTV or jetter. What’s more, bits and
wheels change out rapidly to address practically any combination of pipe size
and material.
Advertisement
Available
in four sizes, HydroCut™ works in pipelines 4-24 inches in diameter. Its mill
arm swivels 400 degrees and articulates 30 degrees. Portable and motorized reels
are available with cable/hose assemblies 165, 260, 330 and 500 ft long.
Freestanding and van-mount controls are also available. A complete HydroCut™
system draws 6A at 110 Vac and requires 3.5 gpm water at 3000
psi.
About
Envirosight LLC
Randolph,
New Jersey-based Envirosight, LLC provides pipeline inspection and
rehabilitation solutions to municipalities, contractors, departments of
transportation, and civil/environmental engineers. Envirosight is committed to
ongoing innovation, delivering products that enhance user productivity and
inspection detail. Envirosight serves customers through a trained network of
regional sales partners who deliver localized support and expertise with rapid
turnaround. All Envirosight technical employees hold NASSCO PACP certification.
Visit Envirosight online at www.envirosight.com.
July 1, 2009
With Five Times the Torque, Hydro-Powered HydroCut Reinstates Laterals Three Times Faster
Randolph,
New Jersey—June
23, 2009—
Powered by water pressure, the HydroCut™ self-propelled cutter generates 5 hp at
30,000 rpm to mill quickly and cleanly through tough materials. Its unique
hydro-powered design solves the biggest shortcomings of pneumatic cutters:
stalls, sloppy cuts, poor visibility, and the need for post-cut brushing and
auxiliary CCTV/jetting.
Water
cooling keeps HydroCut’s™ motor from overheating and extends cutter bit life.
Designed with few wearing parts, the moisture-tolerant motor requires scant
maintenance, most of which can be performed in the field. Diamond-impregnated
hardened-steel Kardiam™ cutter bits last up to 100 hours, minimizing the
disruption and expense of frequent bit changes.
HydroCut’s™
onboard cameras view work as it is being performed. To ensure unobstructed
viewing, debris is washed from the lens by integral water nozzles. High-speed
cutting and a remotely activated stabilizer arm minimize camera
vibration.
Because
HydroCut™ is self propelled, an operator needn’t waste effort stringing winch
lines from secondary access points. The standalone HydroCut™ requires only a
single point of entry and no auxiliary CCTV or jetter. What’s more, bits and
wheels change out rapidly to address practically any combination of pipe size
and material.
Available
in four sizes, HydroCut™ works in pipelines 4-24 inches in diameter. Its mill
arm swivels 400 degrees and articulates 30 degrees. Portable and motorized reels
are available with cable/hose assemblies 165, 260, 330 and 500 ft long.
Freestanding and van-mount controls are also available. A complete HydroCut™
system draws 6A at 110 Vac and requires 3.5 gpm water at 3000
psi.
About
Envirosight LLC
Randolph,
New Jersey-based Envirosight, LLC provides pipeline inspection and
rehabilitation solutions to municipalities, contractors, departments of
transportation, and civil/environmental engineers. Envirosight is committed to
ongoing innovation, delivering products that enhance user productivity and
inspection detail. Envirosight serves customers through a trained network of
regional sales partners who deliver localized support and expertise with rapid
turnaround. All Envirosight technical employees hold NASSCO PACP certification.
Visit Envirosight online at www.envirosight.com.